Forestry Mulching, Land Clearing & Landscaping: Your Questions Answered
Straight answers and typical price ranges for forestry mulching, land clearing, irrigation, fencing, and more across the NC Piedmont Triad. No fluff — just what you need to plan your project.
Last updated: November 2026
Typical Triad Price Ranges
| Service | Typical Triad price range | What changes the price |
|---|---|---|
| Forestry mulching (typical brush & small trees) | $1,200 – $3,500 / acre | Density, tree diameter, slope, access |
| Forestry mulching (light brush & grass) | $800 – $1,500 / acre | How light the growth is |
| Forestry mulching (dense, large-diameter growth) | $3,000 – $5,000+ / acre | Tree size and how thick it stands |
| Land clearing (grubbing + debris removal) | $1,500 – $5,000+ / acre | Stumps, haul-off, grading scope |
| Stump grinding | $150 – $600 / stump | Stump diameter |
| Tree removal | $500 – $3,000+ / tree | Size, access, hazards |
| Equipment with operator (skid steer / excavator) | $125 – $250 / hour | Machine and site conditions |
| Irrigation system installation (residential) | $3,000 – $7,000 | Zones, lot size; $7,000+ for larger |
| Sprinkler repair service call | $100 – $350 | Parts and scope of repair |
| Horse & livestock fencing (installed / linear ft) | $2 – $50 / ft | Fence type (see fencing section) |
| Paver patios & walkways | $15 – $35 / sq ft installed | Paver choice, base prep, sq footage |
| Landscape lighting | $150 – $400 / fixture installed | Fixture type and wiring run |
| Commercial lawn mowing | $75 – $300 / visit | Lot size; larger sites quoted individually |
| Commercial snow removal | $150 – $800 / event | Lot size; seasonal contracts available |
| Retention pond maintenance | ~$200 – $800 / month | Routine programs; repairs quoted per project |
These are typical ranges for the Piedmont Triad. Final pricing depends on a site evaluation. Call (336) 510-8900 to get a quote.
Forestry Mulching Pricing
How much does forestry mulching cost per acre in the Triad?
Typical forestry mulching in the Piedmont Triad runs about $1,200 to $3,500 per acre for standard brush and small trees. Light brush and grass come in lower, around $800 to $1,500 per acre, while dense stands of larger-diameter growth can reach $3,000 to $5,000 or more per acre. Small lots under an acre usually cost more per acre because the same equipment transport and setup spread across fewer acres.
What makes forestry mulching cost more or less?
The biggest drivers are vegetation density, tree diameter, slope, access, total acreage, and how much you want left standing. Thick growth and large stems take more machine time, while steep, rocky, or wet ground slows the work. Open, uniform sites are more efficient per acre, and larger jobs often cost a little less per acre than small ones.
Why does a small lot cost more per acre than a large one?
Equipment transport and setup cost the same whether you're mulching a quarter acre or twenty acres, and that fixed cost gets spread across fewer acres on a small lot. So the per-acre price climbs on small parcels even though the total job is smaller. On larger acreage, that setup cost is amortized across more ground and the per-acre rate drops.
Is forestry mulching cheaper than traditional land clearing?
Usually yes. Forestry mulching skips the hauling, burning, and dumping that traditional clearing requires, which is where a lot of the cost and time go. Virginia Cooperative Extension has published figures showing mulching at roughly half the cost of dozer clearing on comparable sites, though every property is different and a site visit is the only way to know for sure.
Do you charge by the acre or by the hour?
Both are possible. Open or uniform sites are usually quoted per acre because the scope is predictable. Mixed or tricky sites — steep ground, scattered heavy trees, tight access — are sometimes billed hourly at $125 to $250 per hour for equipment with an operator. We'll tell you which makes more sense for your property after seeing it.
Do you offer discounts?
Yes. Veterans and active-duty service members receive 5% off any quoted service. Just let us know when you request your estimate and we'll apply it to the quote.
How Forestry Mulching Works
What is forestry mulching?
Forestry mulching uses a heavy-duty mulching head — usually on a tracked machine — to grind brush, saplings, vines, and small trees into a layer of mulch right where they stand. There's no cutting, piling, hauling, or burning. The mulch stays on the ground to suppress new growth and hold the soil, leaving the property cleaner than traditional clearing.
How big of a tree can a forestry mulcher handle?
Most mulching heads handle trees up to about 8 inches in diameter in a single pass. Larger trees may be felled or removed separately rather than mulched in place. If your property has a lot of mature timber, we'll look at it on the walkthrough and tell you honestly what the machine can and can't do.
How long does it take to mulch an acre?
Light brush can be finished in under a day, sometimes several acres in a day. Dense wooded acreage with larger stems may take a day or more per acre. Slope, access, and how much you want left standing all affect the pace, so we give you a timeline with your estimate.
What happens to the mulch?
The mulch is left in place as a 2 to 4 inch layer that suppresses weeds and helps control erosion while the ground settles. If you're prepping a building pad, lawn, or pasture, it can be raked off or worked in. Most landowners keep it because it protects the bare soil and breaks down over time.
Does forestry mulching remove stumps and roots?
Stumps are mulched down to ground level, but the roots stay in place. If you need stumps gone below grade — for a building pad or a clean lawn area — we offer stump grinding as a separate step. For most pasture, trail, and fence-line work, low stumps and intact roots are exactly what you want.
What is the best time of year for forestry mulching in North Carolina?
Forestry mulching can be done any time of year, but firm, dry ground is ideal. Very wet clay slows the work and can leave more of a footprint, so late spring through fall is usually easiest. We'll work with your schedule and the conditions on your property.
Will it damage my property or leave ruts?
We work to minimize ground disturbance. We use tracked equipment with a lighter footprint than a dozer, and we avoid working soaked ground when we can. On the walkthrough we plan the access route with you so we're careful where we cross drives, lawns, and fences.
Can you leave certain trees standing?
Yes. Selective mulching is a big part of what we do — you can mark specimen trees, shade trees, or anything you want kept before work starts. We mulch around them and leave them standing, so you keep the trees you want and clear the rest.
Land Clearing
How much does land clearing cost per acre in North Carolina?
Land clearing with grubbing and debris removal typically runs $1,500 to $5,000 or more per acre in the Triad. The range is wide because full clearing can include pulling stumps, hauling debris, and grading — all of which add to the base mulching cost. A site visit is the only way to pin down a real number.
What is the difference between forestry mulching and land clearing?
Forestry mulching grinds brush and small trees into mulch that stays on site, with low stumps and roots left in the ground. Traditional land clearing removes stumps and roots, hauls off debris, and often regrades the soil. Mulching is lighter and cheaper; full clearing is what you need when you're building on the ground.
Do I need a permit to clear land in the Triad?
It depends on your county or city. In North Carolina, land disturbance of one acre or more generally requires an erosion and sediment control plan, and stream buffers and wetlands are protected. Check with your county or city before you start, and we can point you in the right direction based on what we see on site.
Can you clear land for a new home, pool, or barn?
Yes. We clear and grade building sites for homes, pools, barns, and outbuildings, whether that starts with forestry mulching or full clearing. We'll look at the footprint, the access, and the finish you need, and tell you which approach fits the plan.
What areas do you serve?
We serve Winston-Salem, Greensboro, High Point, Kernersville, Summerfield, Oak Ridge, Reidsville, Lexington, Thomasville, Clemmons, Asheboro, Burlington, and the greater Piedmont Triad. We also serve Durham County by request. If you're unsure whether you're in range, call (336) 510-8900 and we'll tell you straight.
Stumps and Trees
How much does stump grinding cost?
Stump grinding typically runs $150 to $600 per stump depending on diameter. Small stumps are at the low end, while large or multiple stumps cost more. Grinding takes the stump below grade so you can plant or build over it, and we can quote a per-stump or per-lot price after seeing it.
How much does tree removal cost?
Tree removal usually runs $500 to $3,000 or more per tree depending on size, access, and hazards. A small, easy tree is at the low end, while a large tree near structures or with limited access climbs quickly. We assess each tree on site and give you a clear per-tree quote.
Irrigation and Landscaping
How much does a sprinkler system cost in the Triad?
A typical residential irrigation system runs $3,000 to $7,000 for a standard lawn, and $7,000 or more for larger or multi-zone properties. The price depends on lot size, number of zones, and the heads and controller you choose. We design around your yard and give you a written estimate up front.
How much does sprinkler repair cost?
A sprinkler repair service call typically runs $100 to $350, depending on the parts and the scope of the repair. Simple head swaps are at the low end, while valve or line repairs cost more. We diagnose the issue and quote the fix before any work starts.
How much does a paver patio cost per square foot?
Paver patios and walkways typically run $15 to $35 per square foot installed. The paver you choose, the base prep, and the total square footage all move the number. Because the base is what determines how long it lasts, we don't cut corners underneath even on a budget paver.
How much does landscape lighting cost?
Landscape lighting typically runs $150 to $400 per fixture installed, depending on the fixture type and the wiring run. Path lights are at the lower end, while uplighting and accent fixtures cost more. We plan the layout and wiring while the ground is open when we can.
Fencing for Horses and Livestock
How much does horse fencing cost per foot?
Installed livestock fencing varies by type: woven wire runs $5 to $12 per linear foot, 3 to 4 board wood runs $18 to $40, vinyl or PVC rail runs $25 to $50, and electric or high-tensile runs $2 to $6. The right choice depends on the animal, the terrain, and how permanent you want it.
What is the best fence for horses vs. cattle or goats?
Horses generally do best with visible fencing like board wood, vinyl rail, or woven wire with a top board so they don't run through it. Cattle handle high-tensile or woven wire well, and goats need woven wire or electric to keep them from crawling under. We'll recommend based on your animals and your ground.
Commercial Property Services
How much does commercial lawn care cost?
Commercial lawn mowing typically runs $75 to $300 per visit for small to mid-size properties, with larger sites quoted individually. Frequency, lot size, and obstacles all affect the per-visit price. We offer scheduled maintenance contracts so the cost and scope are predictable month to month.
How much does commercial snow removal cost in North Carolina?
Commercial snow removal typically runs $150 to $800 per event depending on lot size, or it can be set up as a seasonal contract. Because snow is occasional in the Piedmont, per-event pricing is common — you only pay when we plow. We'll quote your lot and lay out the options before winter.
What does retention pond maintenance include and cost?
Routine retention pond maintenance programs run roughly $200 to $800 per month and typically include mowing, vegetation management, inlet and outlet inspection, and debris removal. Repairs and erosion fixes are quoted per project based on what we find. We keep HOA and commercial ponds compliant and documented.
Do you offer maintenance contracts for HOAs and property managers?
Yes. We offer scheduled maintenance contracts for HOAs and commercial property managers covering mowing, grounds care, retention ponds, and seasonal work. Contracts make the scope and cost predictable and keep the property on a consistent schedule. We'll build a plan around your property and budget.
Working With Triad Land WorX
Who owns Triad Land WorX?
Triad Land WorX is family-owned and operated by brothers Jared and John LaPerchia, founded in November 2023. We're a Piedmont Triad crew that handles drainage, land clearing, forestry mulching, irrigation, fencing, and landscape construction for residential, rural, and commercial properties.
What are your hours?
We're open Monday through Saturday, 7 AM to 8 PM, and closed Sunday. You can call or text (336) 510-8900 during those hours, or send a message through the site anytime and we'll get back to you fast.
How do I get a quote?
Call or text (336) 510-8900, email Jared@TriadLandWorX.com, or use the request form on the site. We'll come look at the property and give you a straight-shooting written estimate with the cost drivers explained up front.
Serving
Dedicated forestry mulching landing pages for these Piedmont Triad communities.
Still Have Questions?
Get a free, no-pressure estimate from Triad Land WorX. Call (336) 510-8900 or send us a message and we'll get back to you fast.
Veterans and active duty military receive 5% off any quoted service.
